
云霄
Classical Four-Poster Redwood Bedroom Suite 5-Piece
Five-piece Siamese rosewood bedroom suite with a solid four-poster bed, two nightstands, wardrobe, and dresser with mirror. Hand-carved Ming style joinery, raw lacquer finish, FSC chain-of-custody and CITES export documentation included for European and North American importers.
Highlights
- Solid Siamese rosewood (Dalbergia cochinchinensis) four-poster bed with single-section corner posts
- Five-piece coordinated set: bed, two nightstands, wardrobe, and dresser with mirror
- Mortise-and-tenon joinery with wooden dowels, no primary-frame metal hardware
- Traditional raw lacquer finish, hand-rubbed in multiple cured coats
- FSC chain-of-custody documentation supplied with each shipment
- CITES Appendix II export permits and re-export certificates included
- Hand-carved post finials, apron skirts, and mirror crest rails
- Floating-panel construction on wardrobe and dresser for seasonal wood movement
Specifications
| Wood Species | Siamese Rosewood (Dalbergia cochinchinensis) |
|---|---|
| Finish Type | Traditional Raw Lacquer (Qi), Hand-Rubbed |
| Bed Size | King 180cm x 200cm / Queen 150cm x 200cm |
| Suite Contents | 1 Bed Frame, 2 Nightstands, 1 Wardrobe, 1 Dresser with Mirror |
| Joinery | Mortise-and-Tenon with Wooden Dowels |
| Wood Density | 0.95 to 1.05 g/cm3 Air-Dry |
| Certification | FSC Chain-of-Custody, CITES Appendix II |
| Assembly | Bed Flat-Packed, Case Goods Fully Assembled |
| MOQ | 1 Set |
| Lead Time | 45 to 60 Days for Single Suite |
Product Detail
Complete Five-Piece Bedroom Suite Composition
This suite ships as a coordinated five-piece set: one four-poster bed frame (king or queen, selectable at order), two matching nightstands, one two-door wardrobe, and one dresser with an attached mirror. Each piece is built from the same batch of Siamese rosewood (Dalbergia cochinchinensis), so grain tone and color stay consistent across the room. Buyers furnishing a boutique hotel or a private residence can place the suite as delivered without mixing supplementary woods.
Four-Poster Bed Construction
The bed is the structural anchor of the set. The four corner posts are cut from single solid timber sections, not finger-jointed or veneered, which preserves the load path from canopy rail to floor. Posts are joined to the side rails using mortise-and-tenon joints secured with wooden dowels, avoiding metal hardware in the primary frame. The slat base sits recessed into the side rails and is designed to support a standard innerspring or latex mattress without a box spring. Cross-slats are spaced at approximately 90 mm centers to limit mattress sag over years of use.
Dimensions buyers should confirm
King bed frame outer dimensions are approximately 2.10 m by 2.25 m with a post height near 2.05 m. Queen dimensions are approximately 2.10 m by 1.85 m. Clearance under the side rail is roughly 150 mm. Buyers should measure room ceiling height, doorway widths, and any staircase turn landings before placing an order, since the posts ship as single sections and cannot be broken down for tight stairwells.
Material: Siamese Rosewood
Siamese rosewood is a dense hardwood with an air-dry density around 0.95 to 1.05 g/cm³. The heartwood ranges from reddish-brown to a deeper purplish tone with darker streaking. The wood holds carved detail cleanly because of its tight, interlocked grain, which is one reason it is used for classical Ming and Qing lineage furniture. The grain figure across the five pieces in each suite is matched at the workshop, not at the warehouse, which means each set reads as a single batch when placed in a room.
Buyers in Europe and North America importing Dalbergia cochinchinensis should note the species is listed on CITES Appendix II. 云霄 supplies CITES export permits and re-export certificates with each shipment. Importers should confirm their destination country's CITES Management Authority requirements before the shipment departs, since some EU member states require additional phytosanitary or scientific authority documentation.ion.
Traditional Joinery and Hand-Carved Detail
Joints throughout the suite follow classical Chinese furniture construction: mortise-and-tenon for frame connections, dovetails for drawer boxes, and floating panels housed in grooved frames for wardrobe doors and dresser side panels. The floating-panel technique allows solid wood to expand and contract with seasonal humidity without splitting the frame, which matters for buyers shipping to heated North American winters or air-conditioned European summers.
Carved decorative elements, including post finials, apron skirts, and mirror crest rails, are executed by hand at the workshop. Each post finial is turned and finished individually, so minor variation between finials is normal and expected in hand-worked furniture. Buyers ordering multiple suites for a hotel project should request batch-matched carving if a near-uniform look across rooms is required.
Lacquer Finish
The suite is finished using a traditional raw lacquer (qi) process: multiple thin coats are applied, each cured and hand-rubbed before the next. This builds a surface that is deeper in color than spray lacquer and allows the wood grain to show through. The lacquer layer is not a thick film; it is a penetrating finish that becomes part of the wood surface. Dust particles visible at close inspection under strong light are characteristic of hand-applied lacquer and are not treated as defects at the workshop standard.
Buyers should keep the suite away from direct prolonged sunlight and sudden humidity swings. The lacquer surface can be wiped with a soft dry cloth; avoid alcohol-based cleaners and silicone polish, both of which can cloud the finish over time.
FSC Chain-of-Custody
Siamese rosewood timber in this suite is sourced under FSC chain-of-custody documentation. 云霄 provides FSC transaction claims with each invoice so buyers can pass the claim through to their own customers. Because the wood also carries CITES status, both documentation sets travel together: FSC covers responsible forestry management claims, CITES covers the legal trade and movement of the species. Buyers reselling in the EU or North America can rely on the FSC claim for green-building credits and corporate procurement policies that require it.
Buyer FAQ
Buyer FAQ
- What mattress sizes does the bed frame fit?
- King fits a standard 150 cm by 200 cm or 180 cm by 200 cm mattress depending on the frame variant selected. Queen fits 150 cm by 200 cm. Confirm the exact mattress standard at order, since North American king dimensions (193 cm by 203 cm) differ from European sizes.
- Does the suite require assembly?
- The bed frame ships flat-packed with posts, rails, and slat base separated. Nightstands, dresser, and wardrobe ship fully assembled. Assembly requires two adults and roughly 45 to 60 minutes using the supplied wooden dowels and instruction sheet.
- Is CITES documentation included?
- Yes. Each shipment includes a CITES export permit issued by the Chinese CITES Management Authority. Buyers importing into the EU or North America should confirm whether their destination authority requires a re-export certificate or additional import permit.
- What is the minimum order quantity?
- The minimum order is 1 set. For hotel or multi-suite residential projects, lead time and batch-matched carving can be arranged by confirming room count and delivery schedule at inquiry.
- Can the carving pattern or wood tone be customized?
- Custom engraving and alternative carving motifs can be quoted on request. Wood tone variation is limited to what the natural rosewood batch allows; no staining is applied over the raw lacquer finish.
- What is the lead time?
- Standard production lead time is 45 to 60 days from deposit confirmation for a single suite. Batch orders of five or more suites extend lead time to roughly 75 to 90 days.
Request a Detailed Quote
To prepare an accurate quotation, include the bed size (king or queen), number of suites, delivery destination with postal code, and whether you need batch-matched carving or custom engraving. Mention any CITES import-permit requirements in your destination country so we can attach the correct documentation set.
Request product details

