Ming Style Siamese Rosewood Living Room Sofa 7-Piece Set

Buyer Pain Points This Set Addresses

Importers sourcing classical Chinese living room furniture for European and North American clients often face three recurring problems: inconsistent wood quality across pieces in a multi-item set, joinery that loosens after seasonal humidity swings, and finish systems that fail food-contact safety requirements when the coffee table is used for tea service. This seven-piece Ming-style sofa set is engineered to address all three.

云霄 constructs every piece in the set from the same batch of Siamese rosewood (Dalbergia cochinchinensis), conditioned to a uniform 8 to 12 percent moisture content before joinery begins. Frame connections use mortise-and-tenon joints with bamboo dowel pins rather than metal screws, which allows the wood to expand and contract naturally without stressing the joint. The seven-coat raw lacquer finish penetrates the wood pores rather than forming a brittle surface film, so it does not crack when the frame moves.

Product Solution and Configuration

The set is laid out for medium-to-large living rooms, which is the most common installation size among North American residential buyers and European boutique hotel lobbies. The seven pieces are:

• 1 three-seat central sofa (198 cm length, 68 cm depth, 92 cm backrest height)
• 2 two-seat side sofas (147 cm each)
• 2 single-seat armchairs (68 cm width)
• 1 matching coffee table (120 x 65 cm)
• 1 matching end table (48 x 48 cm)

For buyers who need a different layout, the two single armchairs can be replaced with a third two-seat sofa at the same total package volume. Mention this substitution when requesting a quotation.

Dimensions at a Glance

Cloud-and-Bat Carved Backrest Panels

The backrest panels on each seating piece feature the cloud-and-bat (yun bian) auspicious motif, a classical Ming-dynasty pattern symbolizing good fortune and longevity. Each panel is carved by hand in our Xianyou workshop using chisels and gouges, not CNC routers. A single backrest panel takes approximately 25 carving hours, and the carver adjusts the depth of each cloud curl to the grain orientation of the specific board. This means minor variation exists between panels, which is characteristic of hand-worked furniture and not treated as a defect.

Craftsmanship and Production Process

The manufacturing sequence for this set follows five stages, each with its own quality gate:

• Stage 1 - Timber Selection and Drying: Logs are inspected for heartwood ratio, grain tightness, and absence of mineral streaks. Selected timber is air-dried for a minimum of 12 months, then kiln-conditioned to a target moisture content of 8 to 12 percent. A moisture meter reading is recorded per board before the board enters production.
• Stage 2 - Rough Milling and Component Marking: Each board is rough-cut to component dimensions with 3 mm allowance for final shaping. Grain direction is marked on each piece to ensure that backrest panels, armrests, and seat rails all read in the same visual direction across the set.
• Stage 3 - Joinery Cutting: Mortise-and-tenon joints are cut by hand to 18 mm tenon depth on seat rails and 15 mm on backrest stiles. Bamboo dowel pins are fitted dry before glue application to verify alignment. No metal fasteners are used in the primary frame.
• Stage 4 - Carving: Cloud-and-bat panels are carved after the frame is assembled, so the carver can align the motif to the surrounding rail structure. Carving tools are sharpened every 90 minutes to maintain clean chisel lines on dense rosewood.
• Stage 5 - Lacquer Application: Seven coats of raw lacquer are applied by hand, with each coat cured for 24 hours and hand-rubbed with pumice stone before the next coat. The final coat is polished to a satin sheen that shows the rosewood grain beneath.

Quality Inspection Protocol

Each completed set passes through four inspection checkpoints before packing:

• Joint Integrity Test: Every mortise-and-tenon connection is tested for lateral play by applying 15 kg of horizontal force. Any joint showing visible movement is re-fitted before the set proceeds.
• Moisture Verification: A pin-type moisture meter is used on three points per piece (seat rail, backrest stile, armrest). Readings outside 8 to 12 percent trigger re-conditioning before packing.
• Surface Finish Inspection: The lacquer surface is inspected under 5000K daylight-balanced LED lighting at 30 cm distance. Runs, sags, or uncured tacky spots are reworked before the set ships.
• Carving Detail Check: Each carved panel is visually inspected for chisel marks that indicate tool slippage. Minor grain-responsive variation is accepted; structural damage to the panel is not.

Enterprise Capability

云霄 operates a workshop in Xianyou County, Fujian, a region recognized for classical hardwood furniture craftsmanship. The company was established in 2008 and has produced redwood furniture sets for buyers in Europe and North America. Production capacity and specific client references are available upon request. The workshop maintains FSC chain-of-custody documentation and CITES export permit registrations for Siamese rosewood shipments. OEM carving modifications, custom dimensions for hotel projects, and ODM design development are supported with a 15-day design approval cycle.

Exhibition and Trade Show Experience

云霄 has participated in furniture trade exhibitions in China and has engaged with overseas buyers through Canton Fair and Shanghai International Furniture Fair channels. Specific exhibition dates and booth numbers can be provided on request. Buyers attending these fairs can schedule a workshop visit in Xianyou to inspect production stages and timber stock in person.

Packaging and Export Documentation

Each piece is wrapped in acid-free tissue paper, then corrugated cardboard, then placed in an ISPM-15 heat-treated wooden crate with EPS foam corner blocks. Every shipment includes:

• CITES Appendix II export permit (species-specific, per shipment)
• FSC chain-of-custody certificate copy
• Commercial invoice with HS code 9403.60
• Packing list with crate dimensions and gross weight per piece
• Wood drying certificate showing moisture content at 8 to 12 percent